| 規范序號 | 規范中文名字 | 規范英語名 |
| GB/T13852-1992 | 船舶液壓控制閥技術性標準 | General specification of hydraulic control valves for ship |
| GB/T17490-1998 | 液壓控制閥油孔、底版、操縱設備和電磁線圈的標志 | Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids |
| GB/T15623.1-2003 | 液壓傳動系統 電調配液壓控制閥 第1一部分：四通方位流量控制閥實驗方式 | Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves |
| GB/T15623.2-2003 | 液壓傳動系統 電調配液壓控制閥 第2一部分：三通方位流量控制閥實驗方式 | Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves |
| GB/T17213.7-1998 | 工業生產流程調壓閥第7一部分: 調壓閥數據信息單 | Industrial-process control valves Part 7: Control valve data sheet |
| GB/T17213.8-1998 | 工業生產流程調壓閥第8一部分: 噪音的考慮到第1節: 試驗室內精確測量空氣動力流流徑調壓閥造成的噪音 | Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves |
| GB/T17213.1-1998 | 工業生產流程調壓閥第1一部分: 調壓閥專業術語和條例 | Industrial--Process control valves Part 1: Control valve terminology and general considerations |
| GB/T17213.5-1998 | 工業生產流程調壓閥第5一部分: 標示 | Industrial-process control valves Part 5: Marking |
| GB/T2514-1993 | 四油孔平板式液壓機方位調壓閥組裝面 | Hydraulic fluid power--Four-port directional control valves--Mounting surfaces |
| GB/T8104-1987 | 流量控制閥實驗方式 | Hydraulic fluid power--Valves--Testing method of flow control valves |
| GB/T7940.3-2001 | 氣動式五氣口方位調壓閥第三一部分: 作用鑒別編號管理體系 | Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions |
| GB/T8106-1987 | 方位調壓閥實驗方式 | Hydraulic fluid power--Valves--Testing method of directional control valves |
| GB/T7940.2-2001 | 氣動式五氣口方位調壓閥第二一部分通電氣接頭的組裝面 | Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector |
| GB/T8105-1987 | 壓力控制閥實驗方式 | Hydraulic fluid power--Valves--Testing method of pressure control valves |
| GB/T7940.1-2001 | 氣動式五氣口方位調壓閥第一部分: 不通電氣接頭的組裝面 | Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector |
| GB/T8100-1987 | 平板式連接液壓機壓力控制閥(不包括調速閥)順序閥、卸壓閥、單向節流閥和節流閥組裝面 | Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces |
| GB/T8098-2003 | 液壓傳動系統帶賠償?shù)牧髁靠刂崎y組裝面 | Hydraulic fluid power--Compensated flow control valves--Mounting surfaces |
| JB/T7387-1994(2005復核) | 工業生產過程控制系統用電動式調壓閥 | |
| NF C46-520-1993 | 工業生產流程調壓閥.第8一部分:噪音問題.第2節:根據調壓閥的液壓機流動性造成的噪音的試驗室精確測量 | (Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.) |
| NF C46-522-1994 | 工業生產解決調壓閥.第8一部分:噪音條文.第4節:液壓機流動性造成的噪音預訂(EN 534-8-4) | (Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.) |
| NF E49-080-1-2002 | 標準氣壓液控閥.五通定項調壓閥.第1一部分:沒有射頻連接器的組裝插口 | (Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.) |
| NF E49-080-2-2002 | 標準氣壓液控閥.五通方位調壓閥.第2一部分:隨意選擇電氣設備射頻連接器的組裝插口面 | (Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.) |
| NF C46-505-1998 | 絕緣層全過程調壓閥.第2-3一部分:總流量容積.實驗全過程 | (Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.) |
| NF C46-630-1998 | 工業生產流程調壓閥.第6一部分:調壓閥與定位儀聯接用組裝關鍵點.第1節:線形傳動系統上安裝使用的定位儀 | (Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.) |
| NF E29-453-2000 | 工業生產過程控制閘閥 | (Industrial process control valves.) |
| NF E29-316-5-2001 | 供電用閘閥.適用范圍規定和專用型查驗實驗.第5一部分:操縱閘閥 | (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.) |
| NF C46-521-2001 | 工業生產流程調壓閥.第8一部分:噪音問題.第3節:氣動控制閥噪聲預測分析法 | (Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.) |
| NF E48-435-1998 | 液壓傳動系統.規格02、03和05的四端口號方式自動排氣閥和四端口號方位調壓閥.夾持規格 | (Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.) |
| NF C46-519-2001 | 工業生產流程調壓閥.第8一部分:噪音考慮到.第1節:試驗室精確測量氣動式流過調節閥造成的噪音 | (Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.) |
| NF C46-531-2001 | 工業生產流程調壓閥.第6-2一部分:定位儀裝到調壓閥的組裝實施方案.轉動傳動系統上安裝使用的定位儀 | (Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.) |
| NF E49-091-2002 | 氣壓傳動.調壓閥和其他構件的管口和操縱機械設備的認證 | (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.) |
| XP E29-140-1999 | 應用化石燃料的家庭用設備的調壓閥.安全性調壓閥(含有集中化全自動密閉式器的) | (Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).) |
| NF C46-510-2001 | 工業生產流程調壓閥.第3-1一部分:規格.雙通球形自動式操縱法蘭閥門的零距離規格和雙通球形視角操縱法蘭閥門的核心 | (Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a) |
| NF C46-511-2001 | 工業生產流程調壓閥.第3-2一部分:規格.碟閥以外的轉動操縱閥體的零距離規格 | (Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.) |
| NF E49-090-2-2003 | 氣壓傳動.18mm和26mm五氣口方位調壓閥.第2一部分:帶電子光學電連接頭的組裝面 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.) |
| NF C46-512-1999 | 工業生產解決調壓閥.第3-3一部分:規格.對電焊的首尾相連規格.兩連接頭球形立即式調壓閥(歐洲標準EN 60534-3-3) | (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.) |
| ANSI/IEEE 1290-1996 | 核發電廠電動式調節閘閥電機運用、安全防護、操縱和實驗手冊 | (Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations) |
| ANSI/FCI 87-2-1990 | 扭簧模版推動調壓閥驅動力數據信號規范 | (Power Signal Standard for Spring-Diaphragm Actuated Control Valves) |
| ANSI/ISA 75.08.02-2003 | 無凸臺的調壓閥內孔間的規格(等級150、300和600) | (Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) ) |
| ANSI/ISA S 75.08.03-2001 | 承插電焊焊接端部和螺旋式端部球形調壓閥的面到面規格 | (Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)) |
| ANSI/ISA 75.08.06-2002 | 帶凸臺的球形操縱油路板的零距離規格(種類900、1500和2500) | (Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) ) |
| ANSI/ISA 75.08.05-2002 | 端部對接焊球形調壓閥的零距離規格(種類150、300、600、900、1500和2500) | (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ) |
| ANSI/ISA 75.01.01-2002 | 規格調壓閥用總流量表達式 | (Flow Equations for Sizing Control Valves ) |
| ANSI/ISA 75.08.01-2002 | 集成式帶凸臺的球形操縱油路板的零距離規格(種類125、150、250、300和600) | (Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) ) |
| ANSI/ISA S 75.19.01-2001 | 調壓閥的自流水實驗 | (Hydrostatic Testing of Control Valves) |
| ANSI/ISA S 75.08.04-2001 | 對接焊端部球形調壓閥的面到面規格 | (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves) |
| ANSI/ISA S 75.08.07-2001 | 單獨法蘭盤球形調壓閥的面到面規格 | (Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)) |
| ANSI/(NFPA) T 3.5.14 R1-1997 | 液壓傳動.立即操縱閘閥.交界特點的測定法 | (Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics) |
| ANSI/(NFPA) T 3.21.8-1990 | 標準氣壓液控閥.反應速度的精確測量.立即操縱閘閥 | (Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves) |
| ANSI/ISA S 75.15-1993 | 對接焊端球形調壓閥的零距離規格(ANSI級別150、300、600、900、1500、2500) | (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)) |
| ANSI/FCI 91-1-1997 | 操縱閘閥密封性的檢測標準 | (Standard for Qualification of Control Valve Stem Seals) |
| ANSI/UL 753-1996 | 消防安全設備用全自動供電調壓閥的報警配件 | (Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service) |
| BS EN 60534-2-5-2003 | 工業生產流程調壓閥.商品流通工作能力.根據有段間恢復功能的兩段調壓閥的介質總流量的校正公式計算 | (Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery) |
| ASTM F 1985-1999 | 力氣實際操作的球型調壓閥技術標準 | (Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves) |
| BS EN 60534-3-2-2001 | 工業生產流程調壓閥.規格.碟形閥以外的轉式調壓閥的內孔距 | (Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves) |
| BS ISO 15407-2-2003 | 氣壓傳動.五氣口方位調壓閥,規格型號18mm和26mm.有隨意選擇電連接頭的組裝插口 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector) |
| BS ISO 12238-2001 | 標準氣壓液控閥.方位操縱閘閥.變換時長的精確測量 | (Pneumatic fluid power - Directional control valves - Measurement of shifting time) |
| BS ISO 5599-1-2001 | 標準氣壓液控閥.五通方位調壓閥.沒有射頻連接器的組裝插口表層 | (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector) |
| BS ISO 5599-2-2001 | 標準氣壓液控閥.五通方位調壓閥.隨意選擇電氣設備射頻連接器的組裝插口面 | (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector) |
| BS EN 60534-6-2-2001 | 工業生產流程調壓閥.定位儀裝到調壓閥的組裝實施方案.轉動傳動系統上安裝使用的定位儀 | (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators) |
| BS EN 1074-5-2001 | 供電閘閥.適用范圍和專用型規定的實驗.操縱閘閥 | (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves) |
| BS EN 60534-8-3-2000 | 工業生產步驟調壓閥.噪音問題.調壓閥的空氣動力噪音氣象預報法 | (Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method) |
| BS EN 60534-2-3-1998 | 工業生產流程調壓閥.總流量.實驗程序流程 | (Industrial-process control valves - Flow capacity - Test procedures) |
| BS EN 60534-8-1-2001 | 工業生產流程調壓閥.噪音問題.根據調壓閥的驅動力噪音的試驗室精確測量 | (Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves) |
| BS EN 60534-3-1-2000 | 工業生產流程調壓閥.規格.帶法蘭盤的雙路、球形、自動式操縱閥體的零距離規格和帶法蘭盤的雙路、球形、視角操縱閘閥 | (Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter) |
| BS EN 1349-2000 | 工業生產解決操縱閘閥 | (Industrial process control valves) |
| BS ISO 15407-1-2000 | 18mm和26mm五氣一口氣動方位調壓閥.無電插頭的組裝頁面 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector) |
| BS ISO 11727-1999 | 氣動式流體動力學.調壓閥和其他元器件的操縱機械設備設備和氣缸的鑒別 | (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components) |
| BS EN 60534-3-3-1998 | 工業生產流程調壓閥.規格.連接電焊焊接,兩向,球形,豎直方式調壓閥的終端對尾端規格 | (Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves) |
| BS EN 60534-2-1-1999 | 工業生產流程調壓閥 .流容.組裝標準下流液經營規模方程式 | (Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions) |
| BS ISO 6263-1997 | 液壓傳動系統.賠償式流量控制閥.安裝面 | (Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces) |
| BS ISO 10770-2-1998 | 液壓傳動系統.電方式液壓控制閥.第2一部分:三向流動性調壓閥的檢驗方式 | (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves) |
| BS ISO 10770-1-1998 | 液壓傳動系統.電方式液壓控制閥.第1一部分:四向流動性調壓閥的檢驗方式 | (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves) |
| BS EN 60534-6-1-1998 | 工業生產流程調壓閥 .控制閥控制器聯接用組裝元器件.平行線傳動系統上控制器的組裝 | (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators) |
| BS ISO 7790-1998 | 液壓傳動系統.規格型號為03和05型的四油口設計標準疊閥和四油孔定項調壓閥.擰緊規格 | (Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions) |
| EN 60534-8-1-2000 | 工業生產流程調壓閥 第8一部分：噪音的考慮到 第1節：氣動式流流徑調壓閥造成的噪音的試驗室精確測量 | Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986) |
| EN 60534-8-4-1994 | 工業生產流程調壓閥 第8一部分：噪音問題 第4節：流動性造成的噪音的預測分析 | Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994) |
| EN 60534-8-3-2000 | 工業生產步驟調壓閥 .第8-3一部分 噪音問題 根據調壓閥的驅動力噪音預測分析法 | Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000) |
| EN 1074-5-2001 | 供電閘閥 目地規定的適應能力和適宜的驗證實驗 第5一部分：操縱閘閥 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves |
| EN 60534-3-1-2000 | 工業生產流程調壓閥 第３－１一部分：規格 法蘭盤雙通球型直型調壓閥的內孔間隔規格和有法蘭盤雙通球形角型調壓閥的 | Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000) |
| EN 60534-2-1-1998 | 工業生產流程調壓閥 第2－1一部分：商品流通工作能力 組裝標準下液體總流量的校正公式計算 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998) |
| EN 60534-1-1993 | 工業生產流程調壓閥 第1一部分 調壓閥專業術語和一般考慮到 | Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987) |
| EN 60534-3-2-2001 | 工業生產流程調壓閥 第３一部分：規格 第２節：沒法蘭調壓閥（薄形碟閥以外）的內孔間隔規格 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001) |
| EN 60534-3-3-1998 | 工業生產流程調壓閥 第三一部分：規格 連接電焊焊接 兩向 球形 豎直方式調壓閥的終端對尾端規格 | Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998) |
| EN 60534-6-1-1997 | 工業生產流程調壓閥 第6－1一部分：定位儀聯到調壓閥執行器的組裝實施方案 第1節：平行線傳動系統上控制器的組裝 | Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997) |
| EN 60534-6-2-2001 | 工業生產流程調壓閥 第6－2一部分：定位儀聯到調壓閥執行器的組裝實施方案 環狀執行器定位儀 | Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000) |
| EN 60534-8-2-1993 | 工業生產流程調壓閥 第8一部分 噪音考慮到 第2節根據調壓閥的液體形成的噪音的試驗室精確測量報法 | Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991) |
| EN 60534-2-3-1998 | 工業生產流程調壓閥 第２一部分：商品流通工作能力 第３節：實驗技術規范 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997) |
| prEN 13959-2000 | 磅級在DN6至DN250（含DN250）的污染治理調壓閥 E族A、B、C和D型 | Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D |
| prEN 60534-4-1998 | 工業生產流程調壓閥 第４一部分：檢測和基本實驗 議案 | IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing |
| EN 1349-2000 AC-2001 | 工業生產生產加工操縱閘閥 | Industrial process control valves |
| EN 60534-2-5-2003 | 工業生產生產加工調壓閥 第2-5一部分：總流量 根據帶級間修復多級別調壓閥的液體規格方程式 | Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement notice |
| BS ISO 4401-1996 | 液壓傳動系統.四油孔定項調壓閥.安裝面 | (Hydraulic fluid power - Four-port directional control valves - Mounting surfaces) |
| BS EN 60534-1-1989 | 工業生產流程調壓閥 .第1一部分:調壓閥專業術語和一般考慮到 | (Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations) |
| BS EN 60534-8-4-1994 | 工業生產流程調壓閥.第8一部分:噪音問題.第4節.流動性造成的噪音的氣象預報 | (Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow) |
| BS EN 60534-8-2-1991 | 工業生產流程調壓閥.第8一部分:噪音考慮到.第2節:根據調壓閥的液體形成的噪音的試驗室精確測量 | (Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves) |
| BS 6494-4-1989 | 液壓閥門的組裝面.第4一部分:03和05規格型號的四孔部件自動排氣閥、模二維數組閥和方位調壓閥夾持規格標準 | (Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves) |
| BS 5793-4-1987 | 工業生產流程調壓閥.第4一部分:檢測和常規實驗標準 | (Industrial-process control valves - Specification for inspection and routine testing) |
| BS 5944-4-1984 | 液壓系統軟件和構件所形成的氣體噪聲的精確測量.第4一部分:總流量和壓力控制閥聲功率級的測定法 | (Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure) |
| BS 5793-5-1984 | 工業生產流程調壓閥.第5一部分:標識標準 | (Industrial-process control valves - Specification for marking) |
| BS 1655-1950 | 過程控制工業級法蘭連接全自動調壓閥(面至面規格)標準 | (Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)) |
| DIN EN 60534-2-3-1998 | 工業生產流程調壓閥.第2-3一部分:總流量.檢測方式 | (Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998) |
| DIN EN 60534-6-1-1998 | 工業生產步驟調壓閥.第6一部分:調節閥推動的部位控制器固定不動用組裝關鍵點.第1節:行程安排推動上部位控制器的組裝 | (Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997) |
| DIN EN 60534-1-1995 | 工業生產流程調壓閥.第1一部分:調壓閥專業術語和一般基本原理 | (Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987); German version EN 60534-1:1993) |
| DIN IEC 60534-7-1992 | 工業生產流程調壓閥.第7一部分:.數據分析表 | (Industrial process control valves; control valve data sheet; identical with IEC 60534-7:1989) |
| DIN IEC 60534-2-4-1990 | 工業生產流程調壓閥.第2一部分:商品流通工作能力.第4節:本質的移動特點線和調整占比關聯 | (Industrial-process control valves; flow capacity; inherent flow characteristics and rangeability; identical with IEC 60534-2-4:1989) |
| DIN EN 60534-8-2-1994 | 工業生產流程調壓閥.第8一部分:噪音問題.第2節:由根據調壓閥的液力傳動流形成的噪音的試驗室精確測量 | (Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993) |
| DIN EN 60534-8-4-1995 | 工業生產流程調壓閥.第8一部分:噪音情況.第4節.流動性造成的噪音的氣象預報 | (Industrial-process control valves - Part 8: Noise considerations; section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994); German version EN 60534-8-4:1994) |
| DIN EN 60534-3-1-2000 | 工業生產流程調壓閥.第3-1一部分:規格.雙通球形自動式操縱法蘭閥門的零距離規格和雙通球形視角操縱法蘭閥門的核心 | (Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000); German version EN 60534-3-1:2000 Corrigendum 2000) |
| DIN 3394-3-2004 | 全自動調壓閥.第3一部分:工作壓力為4巴及下列的0級緩解壓力閥門 | (Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar) |
| DIN EN 60534-3-3-2000 | 工業生產流程調壓閥.第3-3一部分:規格.死對頭電焊焊接的死對頭規格,二種方法,球形,斜角型操縱閘閥 | (Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998); German version EN 60534-3-3:1998) |
| DIN EN 60534-2-1-2000 | 工業生產流程調壓閥.第2-1一部分:流動性容積.在組裝標準下液體流動性的規格方程式 | (Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998); German version EN 60534-2-1:1998) |
| DIN EN 1074-5-2001 | 供電閘閥.適用范圍規定和兼容實驗.第5一部分:操縱閘閥 | (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001) |
| DIN EN 12334-2001 | 閥門產品.生鐵操縱閘閥 | (Industrial valves - Cast iron check valves; German version EN 12334:2001) |
| DIN EN 60534-8-3-2001 | 工業生產流程調壓閥.第8-3一部分:噪音問題.調壓閥空氣動力噪音預測分析法 | (Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000) |
| DIN IEC 60534-5-1984 | 工業生產流程調壓閥.第5一部分:標識 | (Industrial-process control valves; part 5: marking) |
| DIN EN 60534-6-2-2001 | 工業生產流程調壓閥.第6-2一部分:定位儀裝到調壓閥上的組裝實施方案.轉動傳動系統上安裝使用的定位儀 | (Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators (IEC 60534-6-2:2000); German version EN 60534-6-2:2001) |
| DIN EN 1349-2000 | 工業生產過程控制閘閥 | (Industrial process control valves; German version EN 1349:2000) |
| DIN EN 60534-8-1-2001 | 工業生產流程調壓閥.第8一部分:噪音問題.第1節:由根據調壓閥的空氣動力流形成的噪音的試驗室精確測量 | (Industrial-process control valves - Part 8: Noise considerations; Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:1986); German version EN 60534-8-1:2000) |
| DIN ISO 15407-1-2003 | 氣壓傳動.五氣口方位調壓閥、規格型號18mm和26mm.第1一部分:無電氣設備連接頭的組裝面 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000)) |
| DIN ISO 5599-1-1998 | 標準氣壓液控閥.五通方位調壓閥.第1一部分:不通電聯接件的組裝插口表層 | (Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connectors (ISO 5599-1:1989)) |
| DIN EN 60534-3-2-2002 | 工業生產流程調壓閥.第3-2一部分:規格.沒法蘭調壓閥(薄形碟閥以外)的內孔間隔規格(IEC60534-3-2:2001) | (Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001) |
| IEC 60534-3-2-2001 | 工業生產流程調壓閥.第3-2一部分:規格.碟形閥以外的轉式調壓閥的內孔距 | (Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves) |
| IEC 60534-2-5-2003 | 工業生產全過程控制閥.第2-5一部分:商品流通工作能力.根據有段間恢復力的兩段操縱閥體的介質總流量的校正公式計算 | (Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery) |
| IEC 60534-5-1982 | 工業生產流程調壓閥.第5一部分:標示 | (Industrial-process control valves. Part 5 : Marking) |
| IEC 60534-2-1-1998 | 工業生產流程調壓閥.第2-1一部分:總流量.組裝標準下液體總流量的校正公式計算 | (Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions) |
| IEC 60534-8-4-1994 | 工業生產流程調壓閥.第8一部分:噪音情況.第4節.流動性造成的噪音的氣象預報 | (Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow) |
| JIS B8656-2002 | 占比電動式液壓機旁通閥流量控制閥實驗方式 | (Test methods for electro-hydraulic proportional bypass flow control valves) |
| JIS B8654-2002 | 占比電動式液壓機串連型流量控制閥實驗方式 | (Test methods for electro-hydraulic proportional series flow control valves) |
| JIS B8657-2002 | 占比電動式液壓機定項旁通閥流量控制閥實驗方式 | (Test methods for electro-hydraulic proportional directional bypass flow control valves) |
| JIS B8659-2-2002 | 液壓傳動系統.電氣設備調整液壓控制閥門.第2一部分:三路定項流量控制閥門的檢驗方式 | (Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves) |
| UL 429-1999 | 電動式調壓閥 | (Electrically operated valves ) |
| UL 753-1995 | 消防安全設備用全自動供電調壓閥警報配件 | (Alarm accessories for automatic water-supply control valves for fire protection service ) |
| UL 1468-1995 | 消防設備用立即操縱的調壓閥和壓力控制閥 | (Direct acting pressure reducing and pressure restricting valves ) |
| UL 1739-1994 | 安防設備用液壓系統操縱的壓力控制閥 | (Pilot-operated pressure-control valves for fire-protection service ) |
| JIS B8655-2002 | 占比電動式液壓機串連型定項流量控制閥實驗方式 | (Test methods for electro-hydraulic proportional directional series flow control valves) |
| JIS B8375-3-2000 | 氣動液壓.五孔定項調壓閥.第3一部分:閥作用通信的登陸密碼系統軟件 | (Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions) |
| JIS B8375-1-2000 | 氣動液壓.五孔定項調壓閥.第1一部分:沒電連接頭的組裝頁面 | (Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector) |
| JIS B8357-2000 | 液壓傳動系統., , , 賠償式流量控制閥.安裝面 | (Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces) |
| JIS B8400-1-2003 | 氣壓傳動.規格為18mm-26mm的五孔定項調壓閥.第1一部分:沒電聯接件的組裝插口表層 | (Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector) |
| JIS F3024-1996 | 造船業.調壓閥用艙面橡膠支座 | (Shipbuilding -- Deck stands for controlling valves) |
| JIS B8658-1989 | 占比電動式液壓控制閥用電力工程放大儀標準 | (Rules of electronic amplifier for electro-hydraulic control valves) |
| JIS B8380-2002 | 標準氣壓液控閥.操縱閘閥和別的元構件出入口和操縱組織的評定 | (Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components) |
| JIS B8376-1994 | 氣動式速率調壓閥 | (Speed control valves for pneumatic use) |
| JIS B8387-2000 | 液壓.四孔調節閥和四孔方位操縱閘閥.02,03,05規格.夾緊規格 | (Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions) |
| JIS B8375-2-2000 | 氣動液壓.五孔定項調壓閥.第2一部分:帶預留電連接頭的組裝頁面 | (Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector) |
| JIS B8664-2001 | 液壓.壓力控制閥(不包括調壓閥)、次序懸板、釋荷閥、單向節流閥和截止閥.組裝表層 | (Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces) |
| JIS B8659-1-2000 | 液壓.電氣設備調整液壓控制閥門.第1一部分:四路直流電操縱閥體的檢驗方式 | (Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves) |
| JIS B2007-1993 | 工業生產流程調壓閥.檢測和基本實驗 | (INDUSTRIAL-PROCESS CONTROL VALVES - INSPECTION AND ROUTINE TESTING) |
| ISO 10770-2-1998 | 液壓傳動系統.電方式液壓控制閥.第2一部分:三向流動性調壓閥的檢驗方式 | (Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves) |
| ISO 5599-3-1990 | 氣壓傳動.五口調壓閥.第3一部分:閘閥作用互換的編號管理體系 | (Pneumatic fluid power; five-port directional control valves; part 3: code system for communication of valve functions) |
| ISO 7790-1997 | 液壓傳動系統.規格型號為03和05型的四油口設計標準疊閥和四油孔定項調壓閥.擰緊規格 | (Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions) |
| ISO 11727-1999 | 氣旋驅動力.調壓閥和其他元器件的操縱機械設備設備和氣缸的鑒別 | (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components) |
| ISO 5599-2-2001 | 標準氣壓液控閥.五通方位調壓閥.第2一部分:隨意選擇電氣設備射頻連接器的組裝插口面 | (Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector) |
| ISO 15407-1-2000 | 18mm和26mm五氣一口氣動方位調壓閥.第1一部分:無電源插頭組裝頁面 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector) |
| ISO 6263-1997 | 液壓傳動系統.賠償式流量控制閥.安裝面 | (Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces) |
| ISO 4401-1994 | 液壓傳動系統.四油孔定項調壓閥.安裝面 | (Hydraulic fluid power - Four-port directional control valves - Mounting surfaces) |
| ISO 15407-2-2003 | 氣壓傳動.五氣口方位調壓閥,規格型號18mm和26mm.第2一部分:可隨意選擇射頻連接器的組裝插口 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2: Mounting interface surfaces with optional electrical connector) |
| ISO 5599-1-2001 | 標準氣壓液控閥.五通定項調壓閥.第1一部分:沒有射頻連接器的組裝插口表層 | (Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector) |
| ISO 12238-2001 | 標準氣壓液控閥.方位操縱閘閥.變換時長的精確測量 | (Pneumatic fluid power - Directional control valves - Measurement of shifting time) |
| ISO 10770-1-1998 | 液壓傳動系統.電方式液壓控制閥.第1一部分:四向流動性調壓閥的檢驗方式 | (Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves) |
| IEC 60534-8-3-2000 | 工業生產流程調壓閥.第8-3一部分:噪音的考慮到.調壓閥的氣動式噪音預測分析法 | (Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method) |
| IEC 60534-8-2-1991 | 工業生產流程調壓閥.第8一部分:噪音問題.第2節:由根據調壓閥的液力傳動流形成的噪音的試驗室精確測量 | (Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves) |
| IEC 60534-2-3-1997 | 工業生產流程調壓閥.第2-3一部分:商品流通工作能力.實驗技術規范 | (Industrial-process control valves - Part 2-3: Flow capacity - Test procedures) |
| IEC 60534-8-1-1986 | 工業生產流程調壓閥.第8一部分:噪音的考慮到.第1節:流過調壓閥的氣動式流形成的噪音的試驗室精確測量 | (Industrial-process control valves. Part 8 : Noise considerations. Section one - Laboratory measurement of noise generated by aerodynamic flow through control walves) |
| IEC 60534-3-3-1998 | 工業生產流程調壓閥.第3一部分:規格.對焊的兩向閥,球形閥,立即圖型調壓閥的首尾相連規格 | (Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves) |
| IEC 60534-6-1-1997 | 工業生產流程調壓閥.第6一部分:定位儀裝到操縱驅動的組裝實施方案.第1節:線形致動器上定位儀組裝 | (Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators) |
| IEC 60534-3-1-2001 | 工業生產流程調壓閥.第3-1一部分:規格.法蘭盤零距離規格,雙路,直型和法蘭盤核心正對面規格,雙路,球型,角型操縱閘閥 | (Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves) |
| IEC 60534-6-2-2000 | 工業生產流程調壓閥.第6-2一部分:定位儀連接到調壓閥的組裝實施方案.環形執行器定位儀 | (Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators) |
| IEC 60534-3-1976 | 工業生產流程調壓閥.第3一部分:規格.第1節:二通球型調壓閥的法蘭盤內孔距 | (Industrial-process control valves. Part 3 : Dimensions. Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves.) |
| IEC 60534-1-1987 | 工業生產流程調壓閥.第1一部分:調壓閥專業術語和一般基本原理 | (Industrial-process control valves. Part 1: Control valve terminology and general considerations.) |
| IEC 60534-2-4-1989 | 工業生產流程調壓閥.第2一部分:商品流通工作能力.第4節:純天然流動性特點和測量范圍范疇 | (Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristics and rangeability) |
| IEC 60534-7-1989 | 工業生產流程調壓閥.第7一部分:數據分析表 | (Industrial-process control valves; part 7: control valve data sheet) |
| IEC 60534-4-1999 | 工業生產流程調壓閥.第4一部分:檢測和基本實驗 | (Industrial-process control valves - Part 4: Inspection and routine testing) |
| QC/T305-1999(2005復核) | 汽車動力轉為調壓閥總程技術性標準 |
| QC/T306-1999(2005復核) | 汽車動力轉為調壓閥總程臺架試驗方式 | |
| GB/T17213.12-2005 | 工業生產流程調壓閥 第3-3一部分：規格 對接焊式兩通球型直達調壓閥的端距 | |
| GB/T17213.4-2005 | 工業生產流程調壓閥 第4一部分：檢測和常規實驗 | |
| GB/T17213.6-2005 | 工業生產流程調壓閥 第6-1一部分：定位儀與調壓閥執行器聯接的組裝關鍵點 定位儀在直行程安排執行器上的組裝 | |
| GB/T17213.13-2005 | 工業生產流程調壓閥 第6-2一部分：定位儀與調壓閥執行器聯接的組裝關鍵點定位儀在角行程安排執行器上的組裝 | |
| GB/T17213.14-2005 | 工業生產流程調壓閥 第8-2一部分：噪音的考慮到 試驗室 內精確測量液動流流過調節閥造成的噪音 | |
| GB/T17213.15-2005 | 工業生產流程調壓閥 第8-3一部分：噪音的考慮到 空氣動力流流過調節閥造成的噪音預測分析方式 | |
| GB/T17213.16-2005 | 工業生產流程調壓閥 第8-4一部分：噪音的考慮到 液動流流過調節閥造成的噪音預測分析方式 | |
| GB/T17213.2-2005 | 工業生產流程調壓閥 第2-1一部分：商品流通工作能力 組裝標準下液體總流量的計算方法 | |
| GB/T17213.9-2005 | 工業生產流程調壓閥 第2-3一部分：商品流通工作能力 實驗程序流程 | |
| GB/T17213.10-2005 | 工業生產流程調壓閥 第2-4一部分：商品流通工作能力 原有總流量特點和可調式比 | |
| GB/T17213.3-2005 | 工業生產流程調壓閥 第3-1一部分：規格 兩通球型直達 調壓閥法蘭盤內孔距和兩通球型角型 調壓閥法蘭盤核心至法蘭盤內孔 | |
| GB/T17213.11-2005 | 工業生產流程調壓閥 第3-2一部分：規格 角行程安排調壓閥(碟閥以外)的內孔距 | |
| MT/T765-1997(2005復核) | 液壓支架用全自動噴霧器調壓閥通用技術標準 |
上一篇電動蝶閥的運用和檢修
下一篇氣動閥門的特性與主要用途
咨詢需求
